watch.md

# watch
## Command Function
This command is used to periodically monitor the execution result of a command.
## Syntax
watch
watch \[_-c/-n/-t/--count/--interval/-no-title/--over_\] \[_command_\]
## Parameter Description
**Table 1** Parameters

Parameter	Description	Default Value	Value Range
-c / --count	Indicates the number of times that the command is executed.	0xFFFFFF	(0, 0xFFFFFF]
-n / --interval	Indicates the interval for periodically running the command, in seconds.	1s	(0, 0xFFFFFF]
-t / -no-title	Disables time display on the top.	N/A	N/A
command	Indicates the command to be monitored.	N/A	N/A
--over	Stops the current command monitoring.	N/A	N/A

## Usage
You can run the **watch --over** command to stop the currently running command monitoring.
## Example
Enter **watch -n 2 -c 6 task**.
## Output
**Figure 1** **task** command monitoring result
> **NOTE:**
>In this example, the **task** command has been executed every 2 seconds for six times, and the preceding figure shows the output of the last execution.